[Guide] How to flash a Custom ROM in your Android Device

Custom ROM Flashing Tutorial

So, you want to install and flash a new ROM in your device because the stock ROM lags, uses lot of RAM and no Customization options ? No problem I got you all covered up.

Your Warranty is now void. Do it at your own risk, I will not be responsible for any damage to your device or property. 

NOTE : YOU SHALL NOT RE-POST, RESHARE OR MODIFY THIS GUIDE AND POST ANYWHERE ELSE

Things You Need :

1. Root Your MTK or Any Android Device : Guide to root 
2. Install/Flash a Custom Recovery : Guide to make and flash Custom Recovery
3. Download a Custom ROM for your device : I have a lot of ROMs for MTK in this site check them out
4. Port it to your device(only if it was not made for your device) : Guides to port can be found on any of my ROMs

TO FLASH A ROM IN YOUR DEVICE :

1. Copy the ZIP file you downloaded and paste it in your SD Card
2. Go to CWM recovery by Turning off your device and then pressing Vol+ and Power Button together
3. Use volume buttons to move to an option
4. Use Power button to select the option
5. Select Wipe Data/Factory Reset, Then Select Yes
6. Then Select Wipe Cache Partition, Then Select Yes
7. Go to Advance > Wipe Dalvik Cache, Then Select Yes
8. Then Select Install ZIP from SD card
9. Then Select chose ZIP from SD card
10. Then Select the ROM you downloaded, Then Select Yes
11. Wait For It to Flash
12. Then Reboot your device

NOTE : Don't worry if it takes to long to boot, first boot takes upto 5 minutes or even more

ONLY FOR PERSONAL USE If you want to share please give proper credits and give link to this post

Congratulations !!! You have successfully flashed a Custom ROM

Install Custom ROM in Android